Calculate iteratively the relief along an interface with lateral density variations that corresponds to a given Bouguer anomaly using the algorithm of Wieczorek and Phillips (1998).

Usage

call BAtoHilmRhoH (cilm, ba, grid, lmax, nmax, mass, r0, rho, gridtype, w, plx, zero, filtertype, filterdeg, lmaxcalc, exitstatus)

Parameters

cilm : output, real(dp), dimension (2, lmaxcalc+1, lmaxcalc+1)
An estimate of the real spherical harmonic coefficients (geodesy normalized) of relief along an interface with lateraly varying density contrast rho that satisfies the Bouguer anomaly ba. The degree-zero term corresponds to the mean radius of the relief.
ba : input, real(dp), dimension (2, lmaxcalc+1, lmaxcalc+1)
The real spherical harmonic coefficients of the Bouguer anomaly referenced to a spherical interface r0.
grid : input, real(dp), dimension (lmax+1, 2*lmax+1) for gridtype 1, (2*lmax+2, 2*lmax+2) for gridtype 2, (2*lmax+2, 4*lmax+4) for gridtype 3
The initial estimate for the radii of the interface evaluated on a grid corresponding to a function of maximum spherical harmonic degree lmax. This is calculated by a call to either MakeGridGLQ or MakeGridDH. This grid must contain the degree-0 average radius of the interface.
lmax : input, integer(int32)
The spherical harmonic bandwidth of the input relief grid, which determines the dimensions of grid. If lmaxcalc is not set, this determines also the maximum spherical harmonic degree of the output spherical harmonic coefficients of the relief and the input spherical harmonics of the Bouguer anomaly.
nmax : input, integer(int32)
The maximum order used in the Taylor-series expansion used in calculating the potential coefficients.
mass : input, real(dp)
The mass of the planet in kg.
r0 : input, real(dp)
The reference radius of the Bouguer anomaly ba.
rho : input, real(dp), dimension (lmax+1, 2*lmax+1) for gridtype 1, (2*lmax+2, 2*lmax+2) for gridtype 2, (2*lmax+2, 4*lmax+4) for gridtype 3
The density contrast of the relief in kg/m^3, with the same dimensions as grid.
gridtype : input, integer(int32)
1 = Gauss-Legendre grids, calculated using SHGLQ and MakeGridGLQ. 2 = Equally sampled Driscoll-Healy grids, n by n, calculated using MakeGridDH. 3 = Equally spaced Driscoll-Healy grids, n by 2n, calculated using MakeGridDH.
w : optional, input, real(dp), dimension (lmax+1)
The weights used in the Gauss-Legendre quadrature. These are calculated from a call to SHGLQ. If present, one of plx or zero must also be present.
plx : optional, input, real(dp), dimension (lmax+1, (lmax+1)*(lmax+2)/2)
An array of the associated Legendre functions calculated at the nodes used in the Gauss-Legendre quadrature. These are determined from a call to SHGLQ.
zero : optional, input, real(dp), dimension (lmax+1)
The nodes used in the Gauss-Legendre quadrature over latitude, calculated by a call to SHGLQ.
filtertype : optional, input, integer(int32), default = 0
Apply a filter when calculating the relief in order to minimize the destabilizing effects of downward continuation which amplify uncertainties in the Bouguer anomaly. If 0, no filtering is applied. If 1, use the minimum amplitude filter DownContFilterMA. If 2, use the minimum curvature filter DownContFilterMC.
filterdeg : optional, input, integer(int32)
The spherical harmonic degree for which the filter is 0.5.
lmaxcalc : optional, input, integer(int32), default = lmax
The maximum degree that will be calculated in the spherical harmonic expansions.
exitstatus : output, optional, integer(int32)
If present, instead of executing a STOP when an error is encountered, the variable exitstatus will be returned describing the error. 0 = No errors; 1 = Improper dimensions of input array; 2 = Improper bounds for input variable; 3 = Error allocating memory; 4 = File IO error.

Description

BAtoHilmRhoH is used to solve iteratively for the relief along an interface with lateral variations in density that corresponds to a given Bouguer anomaly. This is equation 18 of Wieczorek and Phillips (1998), modified to account for density variations as in equation 30 of Wieczorek 2007, which implicitly takes into consideration the finite-amplitude correction. Each iteration takes as input a guess for the relief and outputs the iteratively improved spherical harmonic coefficients of this relief. These coefficients can then be re-expanded and re-input into this routine as the next guess. For the initial guess, it is often sufficient to use the relief predicted using the first-order “mass sheet” approximation. The input relief grid can be of one of three type specified by gridtype: 1 for Gauss-Legendre grids, 2 for equally sampled Driscoll-Healy grids (n by n), and 3 for equally spaced Driscoll-Healy grids (n by 2n).

If the algorithm does not converge, one might want to try damping the initial estimate. Alternatively, iterations of the following form have proven successfulin in damping oscilations between successive iterations:

h3 = (h2+h1)/2 h4 = f(h3)

It is important to understand that as an intermediate step, this routine calculates the spherical harmonic coefficients of the density multiplied by the relief raised to the nth power. As such, if the input function is bandlimited to degree L, the resulting function will thus be bandlimited to degree L*nmax. This subroutine implicitly assumes that lmax is greater than or equal to L*nmax. If this is not the case, then aliasing will occur. In practice, for accurate results, it is found that lmax needs only to be about twice the size of L, though this should be verified for each application. Thus, if the input function is considered to be bandlimited to degree L, the function should be evaluated on a grid corresponding to a maximum degree of about 2L.

If the input grid is evaluated on the Gauss-Legendre points, it is necessary to specify the optional parameters w and zero, or w and plx, which are calculated by a call to SHGLQ. If memory is not an issue, the algorithm can be speeded up by inputing the optional array plx of precomputed associated Legendre functions on the Gauss-Legendre nodes. If plx is not specified, then it is necessary to input the optional array zero that contains the latitudinal Gauss-Legendre quadrature nodes.

This routine uses geodesy 4-pi normalized spherical harmonics that exclude the Condon-Shortley phase; This can not be modified.

References

Wieczorek, M. A. and R. J. Phillips, Potential anomalies on a sphere: applications to the thickness of the lunar crust, J. Geophys. Res., 103, 1715-1724, 1998.

See also

batohilm, cilmplus, cilmplusrhoh, shexpandglq, makegridglq, shglq, shexpanddh, makegriddh, glqgridcoord, downcontfilterma, downcontfiltermc

Tags: fortran
Edit me